1. In ________-generation computer the speed was measured in nanoseconds.
1) first
2) second
3) third
4) fourth
5) fifth
2. The process of transferring of files from your computer
to the computer on the internet is called
1) downloading
2) uploading
3) FTP
4) JPEG
5) downsizing
3. Timing and control unit is a part of a(n)
1) ALU
2) Processor
3) Memory
4) CMOS
5) BIOS
4. Chip is the common name for a(n)
1) transistor
2) resistor
3) integrated circuit
4) semiconductor
5) None of these
5. ________ is developed specifically for a distinct
industry.
1) Personal productivity software
2) Application software
3) Decision support system
4) Vertical market software
5) System software
6.Which of the following services is not provided by
Internet service provider?
1) Internet transit
2) Domain name registration
3) Hosting
4) Dial-up access
5) None of these
7. A source program is written in a ________ language.
1) high-level
2) low-level
3) binary
4) All the above
5) None of these
8. The transfer rate of a standard USB 2.0 Device is
1) 100 M bit/s
2) 250 M bit/s
3) 480 M bit/s
4) 500 M bit/s
5) 1G bit/s
9. The control part of a disk is known as
1) surface
2) hub
3) cylinder
4) cluster
5) None of these
10.Which of the following languages is used for process
control?
1) ADA
2) COBOL
3) BASIC
4) PASCAL
5) LISP
Answers
1. 3
2. 2
3. 2
4. 3
5. 4
6. 5
7. 1
8. 3
9. 2
10. 1
1) first
2) second
3) third
4) fourth
5) fifth
2. The process of transferring of files from your computer
to the computer on the internet is called
1) downloading
2) uploading
3) FTP
4) JPEG
5) downsizing
3. Timing and control unit is a part of a(n)
1) ALU
2) Processor
3) Memory
4) CMOS
5) BIOS
4. Chip is the common name for a(n)
1) transistor
2) resistor
3) integrated circuit
4) semiconductor
5) None of these
5. ________ is developed specifically for a distinct
industry.
1) Personal productivity software
2) Application software
3) Decision support system
4) Vertical market software
5) System software
6.Which of the following services is not provided by
Internet service provider?
1) Internet transit
2) Domain name registration
3) Hosting
4) Dial-up access
5) None of these
7. A source program is written in a ________ language.
1) high-level
2) low-level
3) binary
4) All the above
5) None of these
8. The transfer rate of a standard USB 2.0 Device is
1) 100 M bit/s
2) 250 M bit/s
3) 480 M bit/s
4) 500 M bit/s
5) 1G bit/s
9. The control part of a disk is known as
1) surface
2) hub
3) cylinder
4) cluster
5) None of these
10.Which of the following languages is used for process
control?
1) ADA
2) COBOL
3) BASIC
4) PASCAL
5) LISP
Answers
1. 3
2. 2
3. 2
4. 3
5. 4
6. 5
7. 1
8. 3
9. 2
10. 1
1. In ________-generation computer the speed was measured in nanoseconds.
1) first
2) second
3) third
4) fourth
5) fifth
2. The process of transferring of files from your computer
to the computer on the internet is called
1) downloading
2) uploading
3) FTP
4) JPEG
5) downsizing
3. Timing and control unit is a part of a(n)
1) ALU
2) Processor
3) Memory
4) CMOS
5) BIOS
4. Chip is the common name for a(n)
1) transistor
2) resistor
3) integrated circuit
4) semiconductor
5) None of these
5. ________ is developed specifically for a distinct
industry.
1) Personal productivity software
2) Application software
3) Decision support system
4) Vertical market software
5) System software
6.Which of the following services is not provided by
Internet service provider?
1) Internet transit
2) Domain name registration
3) Hosting
4) Dial-up access
5) None of these
7. A source program is written in a ________ language.
1) high-level
2) low-level
3) binary
4) All the above
5) None of these
8. The transfer rate of a standard USB 2.0 Device is
1) 100 M bit/s
2) 250 M bit/s
3) 480 M bit/s
4) 500 M bit/s
5) 1G bit/s
9. The control part of a disk is known as
1) surface
2) hub
3) cylinder
4) cluster
5) None of these
10.Which of the following languages is used for process
control?
1) ADA
2) COBOL
3) BASIC
4) PASCAL
5) LISP
Answers
1. 3
2. 2
3. 2
4. 3
5. 4
6. 5
7. 1
8. 3
9. 2
10. 1
1) first
2) second
3) third
4) fourth
5) fifth
2. The process of transferring of files from your computer
to the computer on the internet is called
1) downloading
2) uploading
3) FTP
4) JPEG
5) downsizing
3. Timing and control unit is a part of a(n)
1) ALU
2) Processor
3) Memory
4) CMOS
5) BIOS
4. Chip is the common name for a(n)
1) transistor
2) resistor
3) integrated circuit
4) semiconductor
5) None of these
5. ________ is developed specifically for a distinct
industry.
1) Personal productivity software
2) Application software
3) Decision support system
4) Vertical market software
5) System software
6.Which of the following services is not provided by
Internet service provider?
1) Internet transit
2) Domain name registration
3) Hosting
4) Dial-up access
5) None of these
7. A source program is written in a ________ language.
1) high-level
2) low-level
3) binary
4) All the above
5) None of these
8. The transfer rate of a standard USB 2.0 Device is
1) 100 M bit/s
2) 250 M bit/s
3) 480 M bit/s
4) 500 M bit/s
5) 1G bit/s
9. The control part of a disk is known as
1) surface
2) hub
3) cylinder
4) cluster
5) None of these
10.Which of the following languages is used for process
control?
1) ADA
2) COBOL
3) BASIC
4) PASCAL
5) LISP
Answers
1. 3
2. 2
3. 2
4. 3
5. 4
6. 5
7. 1
8. 3
9. 2
10. 1
